Product Description
Product Description
As the series of PVC-U SCH80 piping network products for water supply and drainage with mature technology pipes and fittings of PVC-U are 1 of the largest outputs for plastic products in the world, which already had been used widely both at home and abroad.
For CHINAMFG PVC-U SCH80 water supply piping network, the raw materials and finished products are both match or exceed the relative standards. So CHINAMFG PVC-U SCH80 piping network can suit for the equipments of drinking water supply. The piping networks are designed for the uninterrupted supply of water condition from 20°C to 50°C. Under this condition, ser vice life of piping network can up to 50 years. CHINAMFG PVC-U piping network have the full series size and model. Fittings for building water supply, which can suit for many kinds of requirement.
The series of PVC-U SCH80 fittings (socket type) can match the standard ASTM D2467, the series of PVC-U SCH80 fittings (threaded type) can match the standard ASTM D2464, and the series of PVC-U SCH80 pipes can match the standard ASTM D1785.
Advantages:
1) Healthy, bacteriological neutral, conforming to drinking water standards
2) Resistant to high temperatures, good impact strength
3) Convenient and reliable installation, low construction expenses
4) Excellent heat-insulation property from minimum thermal conductivity
5) Lightweight, convenient to transport and handle, good for labor-saving
6) Smooth inner walls reduce pressure loss and increase flow speed
7) Sound insulation (reduced by 40% compared to galvanized steel pipes)
8)Temperature:100 Centigrade
FEATURES OF PRODUCT
High Flow Ability:
The inside and outside wall are smooth, the coefficient of friction is small, roughness is only 0.008 to 0.009, anti-fouling property is strong, fluid transport efficiency is enhanced 25% than cast iron piping network.
Corrosion Resistant:
PVC-U material has strong resistance to most of acid and alkali. No rust, no antiseptic treatment. The service life is 4 times than that of cast iron.
Light Weight and Easy Installation:
Weight is very light. The density of PVC-U is only 1/5 to 1/6 of that of cast iron. The method of connection is very simple, and the process of installation is very quickly.
High Tensile Strength:
PVC-U has high tensile strength, and high shock strength. The piping network of PVC-U is not easy to break, and it works safety.
Long Service Life:
The piping network with normal material can be used around 20 to 30 years, but the PVC-U piping network can be used longer than 50 years.
Cheaper Prices:
The price of PVC-U piping network are cheaper than that of cast iron.
FIELDS OF APPLICATION
Piping networks for water supply in building.
Piping networks for piping system in water treatment plant.
Piping networks for water farming.
Piping networks for irrigation, normal water transport for industry.
| FAQ: |
| 1.What is your MOQ? Our MOQ is usually 5 CTNS. 2.What is your delievery time? 3.What is the shipping port? 4.What is your payment terms? 5.How should I contact you? 6.What is the location of your company? 7.How about the samples? 8.Why choose us? Our Services: Contact |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | PVC, Plastic |
|---|---|
| Connection: | Glue/Hot Meld |
| Hardness: | Hard Tube |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Where can I find online communities or forums discussing experiences with plastic bushings in specific applications?
Online communities and forums dedicated to discussing experiences with plastic bushings in specific applications can provide valuable insights and knowledge-sharing opportunities. Here are some places where you can find such communities:
- Engineering and Mechanical Forums: Online forums and communities focused on engineering, mechanical design, or specific industries often have dedicated sections or threads where professionals discuss various components, including plastic bushings. Platforms like Reddit, Stack Exchange, or specialized engineering forums allow users to post questions, share experiences, and seek advice from others in the field. Explore relevant subreddits or forums and search for topics related to plastic bushings or specific applications to find discussions and experiences shared by community members.
- Industry-Specific Forums: Depending on the specific application or industry you are interested in, there may be industry-specific forums or communities where professionals gather to discuss challenges, solutions, and experiences related to equipment components. These forums can be industry-specific platforms, professional association websites, or dedicated online communities. For example, if you are looking for discussions on plastic bushings used in automotive applications, you might find relevant forums on automotive engineering websites or automotive enthusiast communities.
- LinkedIn Groups: LinkedIn, a professional networking platform, hosts numerous industry-specific groups where professionals share insights, ask questions, and discuss various topics. Search for groups related to your specific application or industry that focus on mechanical engineering, equipment design, or maintenance. Join these groups and actively participate in discussions related to plastic bushings. Engaging with professionals in your field of interest can provide valuable perspectives and experiences.
- Online Machinery and Equipment Communities: Online communities or platforms dedicated to machinery and equipment enthusiasts or professionals can also be a source of information on plastic bushings. These communities may have dedicated sections or discussions related to components, maintenance, or troubleshooting. Explore machinery or equipment-focused websites, forums, or social media groups to find discussions or experiences shared by individuals who have worked with plastic bushings in specific applications.
- Manufacturer Websites and Support Forums: Manufacturers of plastic bushings sometimes have their own websites with support forums or discussion boards where users can post questions, share experiences, and seek advice. These forums may be specific to the manufacturer’s product line or cover broader topics related to plastic bushings. Visit the websites of manufacturers that produce the plastic bushings you are interested in and look for community sections or support forums where you can engage with other users and professionals.
When participating in online communities or forums, it’s important to respect community guidelines, ask specific questions, and provide relevant information about your application to receive targeted responses. Engaging with experienced professionals and learning from their experiences can help you gain valuable insights into the use of plastic bushings in specific applications and make informed decisions for your own projects.
Can I get guidance on selecting plastic bushings based on factors like load capacity, speed, and temperature?
Yes, you can obtain guidance on selecting plastic bushings based on factors such as load capacity, speed, and temperature. Considering these factors is crucial for choosing the appropriate plastic bushings that can withstand the specific operating conditions of your application. Here are some sources that can provide guidance on selecting plastic bushings:
- Manufacturer Documentation: Manufacturers of plastic bushings often provide technical documentation, catalogs, or product datasheets that include information on load capacity, speed limits, and temperature ratings. These resources typically outline the performance characteristics and specifications of different bushing materials and can guide you in selecting the most suitable bushings for your application. Visit the websites of reputable manufacturers or contact their customer support for access to these resources.
- Engineering Handbooks and Reference Guides: Engineering handbooks and reference guides related to mechanical design, tribology, or materials science can offer valuable guidance on selecting plastic bushings. These resources often provide formulas, charts, and guidelines for calculating load capacity, considering speed limitations, and understanding temperature effects on various materials. Look for industry-standard handbooks or reference guides that cover topics relevant to your application and consult the sections on bushing selection.
- Industry Associations and Standards Organizations: Industry associations and standards organizations in the machinery, automotive, or related sectors may have published guidelines or standards for selecting plastic bushings based on load capacity, speed, and temperature considerations. Visit their websites or contact them directly to inquire about any available resources or recommendations. These organizations often have technical committees and experts who can provide valuable guidance based on industry best practices.
- Consulting with Application Engineers: If you require more personalized guidance, consider consulting with application engineers or technical experts who have expertise in the field of bushing selection. Application engineers can assess your specific application requirements, including load capacity, speed, and temperature, and make recommendations based on their experience and knowledge. Reach out to plastic bushing manufacturers, suppliers, or engineering consulting firms to inquire about their consulting services.
- Online Forums and Communities: Participating in online forums and communities focused on machinery, engineering, or tribology can provide access to collective knowledge and experiences of professionals in the field. Engage in discussions, ask questions, and seek guidance on selecting plastic bushings based on load capacity, speed, and temperature requirements. Experienced members of these communities can often provide practical insights and recommendations.
When selecting plastic bushings, it’s important to consider not only the load capacity, speed, and temperature requirements but also factors such as the specific application environment, chemical compatibility, and maintenance considerations. It’s recommended to gather information from multiple sources and consult with experts to ensure the most suitable selection for your application.
By utilizing the available guidance and expertise, you can make informed decisions when selecting plastic bushings, considering factors such as load capacity, speed limits, and temperature requirements, thereby optimizing the performance and reliability of your machinery or equipment.
What are the key considerations when selecting plastic bushings for corrosive environments?
When selecting plastic bushings for corrosive environments, it’s essential to consider several key factors to ensure the longevity and performance of the bushings. Corrosive environments can pose significant challenges to materials, including degradation, chemical attack, and loss of mechanical properties. Here are the key considerations when selecting plastic bushings for corrosive environments:
- Chemical Compatibility: The first and foremost consideration is the chemical compatibility of the plastic material with the corrosive substances present in the environment. Different plastics have varying degrees of resistance to specific chemicals. It’s crucial to identify the types of corrosive chemicals, acids, bases, solvents, or other substances that the bushings will be exposed to and choose a plastic material that offers excellent resistance to those specific chemicals.
- Material Selection: Certain plastic materials are known for their superior chemical resistance properties. For corrosive environments, consider using plastic materials such as PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene Fluoride), PPS (Polyphenylene Sulfide), or ETFE (Ethylene Tetrafluoroethylene). These materials offer excellent resistance to a wide range of corrosive chemicals and can withstand harsh environments.
- Temperature Range: In addition to chemical compatibility, consider the temperature range of the corrosive environment. Some plastics may have temperature limitations and can degrade or lose their chemical resistance properties at elevated temperatures. Ensure that the selected plastic material can withstand the temperature range of the corrosive environment without compromising its performance or chemical resistance.
- Load and Wear Requirements: Evaluate the load and wear requirements of the application. Corrosive environments may involve abrasive particles or high loads that can accelerate wear and reduce the lifespan of the bushings. Select plastic materials that offer excellent wear resistance and can withstand the specific load conditions of the application.
- Sealing and Contamination: Corrosive environments often involve the presence of moisture, gases, or contaminants. Consider whether the bushings need to provide sealing properties to prevent ingress of corrosive substances or contamination. Some plastic bushings can be designed with additional sealing features to enhance protection against corrosive elements.
- UV and Weather Resistance: If the corrosive environment involves exposure to sunlight or outdoor weather conditions, consider the UV resistance and weatherability of the plastic material. Some plastics may degrade or experience color fading when exposed to prolonged sunlight or extreme weather conditions. Choose a plastic material that offers good UV resistance and weather resistance properties if applicable.
- Manufacturer Expertise: Work closely with manufacturers or suppliers who have expertise in providing plastic bushings for corrosive environments. They can offer guidance on material selection, design considerations, and provide specific recommendations based on their experience and knowledge of different plastic materials and their performance in corrosive environments.
It’s important to thoroughly assess the corrosive environment and consult with experts to ensure the right plastic material is selected for the bushings. Conduct compatibility tests, review material datasheets, and consider real-world application experiences to make an informed decision. Additionally, proper installation, regular inspection, and maintenance practices should be followed to maximize the performance and lifespan of the plastic bushings in corrosive environments.
By considering these key factors, you can select plastic bushings that are well-suited for corrosive environments, providing reliable and long-lasting performance even in the presence of corrosive substances.
editor by CX 2024-04-22