China wholesaler Engineering Plastic Peek Seal Bushing with Good quality

Product Description

Engineering plastic Peek seal Bushing

PEEK is a kind of heat-resistant, high performance thermoplastic special engineering plastics. It has good mechanical properties and chemical resistance, abrasion resistance, and hydrolysis resistance properties etc.; It has a light proportion and self-lubricating properties. Due to very good processing properties, it can be filled with carbon fiber and MOS2 etc. To improve lubrication performance and mechanical strength further.

PEEK engineering plastics have a broad application space related to aviation, machinery, electronics, chemical industry, automobiles, and other high-tech industry, mechanical parts and accessory can be manufactured in stringent requirements, such as gears, bearings, piston rings, supporting ring, sealing ring (letter), valves, and other wear circle.

The outstanding performance of PEEK material mainly shows in the following aspects:

1. Heat-resistance
PEEK has a higher glass transition temperature and melting point (334º C). It is 1 of the reasons that it can be a reliable application in the requirement of the heat. Its heat load variable-temperature can be 316º C, continuous use temperature is 260º C.

2. Mechanical Properties
PEEK is the plastic that strikes a balance between toughness and rigidity. Especially, it has an excellent fatigue resistance against alternating stress that is the most talented of all plastics, and it can be comparable with alloys.

3. Self-lubricating
PEEK has outstanding sliding characteristics in all plastics; It is suitable for stringent requirements for low coefficient of friction and resistance to friction used. Especially, the self-lubricating properties of PEEK will be better if it is modified by carbon fiber and graphite mixed in the proportion of each of them.

4. Chemical Resistance (corrosion resistance)
PEEK has excellent chemical resistance. In ordinary chemicals, it can be dissolved or damaged only by concentrated sulfuric acid; Its corrosion resistance is similar to those of steel and nickel.

5. Flame Retardant
PEEK is a very stable polymer. The 1.45mm thick samples can achieve the highest standard of fire retardant without adding any fire retardant.

6. Stripping Resistance
PEEK has good stripping resistance; Therefore, it can be made into thin wires or electromagnetic wire coating, and it can be used in harsh conditions.

7. Fatigue Resistance
PEEK has the best fatigue resistance among all resins.

8. Radiation Resistance
PEEK has a very strong γ Irradiated resistance, which is stronger than the radiation resistance of polystyrene, which is the best 1 among generic resin. It can be made into high-performance wiring that can still make good insulation capability when γ Irradiation is at doses of 1100Mrad.

9. Hydrolysis Resistance
PEEK and its composites will not be affected chemically by water and high-pressure steam. The products that are made from this material will maintain the outstanding characteristics in continuous use in high temperature and high pressure water.

Property Item No. Unit PEEK-1000 PEEK-CA30 PEEK-GF30
Mechanical Properties 1 Density g/cm3 1.31 1.41 1.51
2  Water absorption(23ºCin air) % 0.20 0.14 0.14
3 Tensile strength MPa 110 130 90
4 Tensile strain at break % 20 5 5
5 Compressive stress(at 2%nominal strain) MPa 57 97 81
6 Charpy impact strength (unnotched) KJ/m 2 No break 35 35
7 Charpy impact strength (notched) KJ/m 2 3.5 4 4
8 Tensile modulus of elasticity MPa 4400 7700 6300
9 Ball indentation hardness N/mm 2 230 325 270
  10 Rockwell hardness M105 M102 M99

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Peek
Size: According to Drawing or Sample
Color: Natural, Black
Tooling: CNC Lathe
Transport Package: Packing in Wooden Pallet
Specification: RoHS, FDA
Customization:
Available

|

Customized Request

plastic bush

Can I get advice on choosing plastic bushings for noise reduction in machinery or equipment?

If you are seeking advice on choosing plastic bushings for noise reduction in machinery or equipment, consider the following factors:

1. Material Selection:

– Look for plastic bushings made from materials specifically designed for noise reduction, such as acetal (POM), nylon, or polyurethane. These materials have inherent damping properties that can help reduce vibrations and noise.

– Consider the operating conditions of your machinery or equipment. Ensure that the chosen plastic bushings can withstand the temperature, humidity, and chemical exposure of the application environment.

2. Design and Fit:

– Choose bushings with a design that matches the specific requirements of your machinery or equipment. Consider factors such as the load-bearing capacity, clearance, and fit tolerance.

– Opt for bushings with a tight fit to minimize movement and vibration, which can contribute to noise generation. A snug fit can help dampen vibrations and reduce noise effectively.

3. Lubrication and Maintenance:

– Plastic bushings often require lubrication to minimize friction and noise. Consider whether the chosen bushings need periodic lubrication or if they are self-lubricating.

– Evaluate the maintenance requirements of the bushings. Some plastic bushings may require regular inspection and replacement if they wear out quickly, while others have a longer lifespan.

4. Compatibility and Performance:

– Ensure that the chosen plastic bushings are compatible with the machinery or equipment they will be used in. Consider factors such as shaft material, surface finish, and operating speed to ensure optimal performance.

– Look for bushings that have been specifically tested or certified for noise reduction applications. Manufacturers may provide information on noise reduction capabilities, such as decibel reduction or noise attenuation levels.

5. Expert Advice and Supplier Support:

– Consult with experts or suppliers specializing in plastic bushings for noise reduction applications. They can provide valuable guidance based on their knowledge and experience.

– Explain your specific requirements and provide details about the machinery or equipment to receive tailored recommendations and ensure the best possible noise reduction solution.

By considering material selection, design and fit, lubrication and maintenance, compatibility and performance, and seeking expert advice and supplier support, you can make an informed decision when choosing plastic bushings for noise reduction in machinery or equipment. Prioritize noise reduction properties while ensuring compatibility with the application and considering long-term performance and maintenance needs.

plastic bush

What are the common sizes and dimensions of plastic bushings, and how do I choose the right one for my application?

When selecting plastic bushings, it’s important to consider the appropriate sizes and dimensions to ensure compatibility with your application. Common sizes and dimensions of plastic bushings can vary depending on the specific industry and application requirements. Here’s some information to help you understand the common sizing aspects and guide you in choosing the right plastic bushing for your application:

  • Inner Diameter (ID): The inner diameter refers to the measurement of the opening of the bushing, which corresponds to the shaft or pin it will be mounted on. It is crucial to select a plastic bushing with an inner diameter that matches the diameter of the shaft or pin in your application. Measuring the shaft or pin accurately will help you determine the appropriate inner diameter of the bushing.
  • Outer Diameter (OD): The outer diameter refers to the measurement of the outside surface of the bushing. It corresponds to the bore or housing in which the bushing will be inserted. Ensure that the outer diameter of the plastic bushing matches the dimensions of the bore or housing to achieve a proper fit and alignment.
  • Length: The length of the plastic bushing is the distance between the two ends of the bushing. It determines the amount of space occupied by the bushing within the application. Consider the available space and clearance in your application to select a plastic bushing with an appropriate length that fits without interference.
  • Flange or Collar: Some plastic bushings may have a flange or collar at one end, which provides additional support or acts as a stopper. The presence of a flange or collar can affect the overall dimensions and installation requirements of the bushing. Determine if your application requires a bushing with a flange or collar, and consider the additional dimensions it adds to the overall size.
  • Wall Thickness: The wall thickness of the plastic bushing refers to the thickness of the material between the inner and outer surfaces of the bushing. It plays a role in determining the strength and load-bearing capacity of the bushing. Consider the expected loads and forces in your application to select a bushing with an adequate wall thickness to handle the required load requirements.

In order to choose the right plastic bushing for your application, it is recommended to follow these steps:

  1. Identify the specific dimensions and requirements of your application, such as the required inner diameter, outer diameter, length, and any additional considerations like flanges or collars.
  2. Refer to the manufacturer’s documentation, catalogs, or product datasheets to identify plastic bushings that match your required dimensions and meet the performance criteria for your application.
  3. Consider the load capacity, speed limitations, temperature range, and other relevant factors specified by the manufacturer to ensure the selected bushing meets the performance requirements of your application.
  4. If necessary, consult with application engineers or technical experts who can provide guidance based on their experience and knowledge of plastic bushings.
  5. Procure a sample or a small quantity of the selected plastic bushing to test its fit, function, and performance in your specific application before proceeding with larger-scale implementation.

By considering the common sizes and dimensions of plastic bushings and following the selection process outlined above, you can choose the right plastic bushing that fits your application’s requirements, ensuring proper functionality and performance.

plastic bush

Are there video tutorials on the proper installation and maintenance of plastic bushings in various machinery?

Yes, there are video tutorials available that provide guidance on the proper installation and maintenance of plastic bushings in various machinery. These video tutorials can be valuable resources for understanding the correct procedures and best practices to ensure optimal performance and longevity of the bushings. Here are some ways to access video tutorials on the installation and maintenance of plastic bushings:

  • Manufacturer Websites: Many manufacturers of plastic bushings provide video tutorials on their official websites. These videos are often created by the manufacturers themselves and offer detailed instructions specific to their products. Visit the websites of reputable plastic bushing manufacturers and look for their resources section or video library to find relevant installation and maintenance tutorials.
  • Online Video Platforms: Video-sharing platforms such as YouTube, Vimeo, and Dailymotion host a vast amount of instructional content, including tutorials on the installation and maintenance of various components, including plastic bushings. You can use the search function on these platforms and enter relevant keywords such as “plastic bushing installation” or “plastic bushing maintenance” to find videos created by experts or enthusiasts in the field.
  • Industrial Associations and Organizations: Industry-specific associations and organizations often provide educational resources for professionals in the field. Visit the websites of these associations or organizations related to the machinery or industrial sector you are interested in and look for any available video tutorials or instructional materials on plastic bushing installation and maintenance.
  • Online Forums and Communities: Participating in online forums and communities dedicated to machinery, engineering, or related topics can be a valuable source of information. Members of these communities often share their experiences, tips, and video tutorials on various aspects of machinery maintenance, including the installation and maintenance of plastic bushings. Engage in discussions, ask questions, and seek recommendations for video tutorials from experienced members.
  • Training Courses and Webinars: Some organizations offer online training courses or webinars on machinery maintenance and component installation, which may include specific modules on plastic bushings. These courses often provide comprehensive guidance and may include video demonstrations or tutorials as part of the learning materials. Look for training providers or educational platforms that offer courses related to machinery maintenance and inquire if they cover topics related to plastic bushing installation and maintenance.

When accessing video tutorials on the installation and maintenance of plastic bushings, it’s essential to prioritize reliable and reputable sources. Check the credentials of the video creators, read user reviews or comments, and ensure that the information provided aligns with industry best practices. Additionally, always refer to the manufacturer’s guidelines and recommendations specific to the plastic bushings you are working with, as different products may have unique installation and maintenance requirements.

By utilizing video tutorials and instructional materials, you can gain valuable insights into the proper installation and maintenance procedures for plastic bushings in various machinery, helping you ensure the correct handling and care of these components.

China wholesaler Engineering Plastic Peek Seal Bushing   with Good quality China wholesaler Engineering Plastic Peek Seal Bushing   with Good quality
editor by CX 2024-02-17