China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel bushing replacement

Product Description

Guaranteed Quality Finished Bore QD sprocket chain & sprocket in steel and stainless steel

QD bushing is easy to install and remove. They are separated by the barrel and have a taper to provide accurate clamping on the shaft. They are keyed to the post and hub for blind installation.
How to install QD sprocket
Make sure that the tapered surface of the bushing and the inside of the driven product are clean and free of anti-seize lubricant
Place the bushing in the sprocket or other parts.
Loosely place the cap screw in the upper pull hole. The bushing remains loose to ensure a sliding fit with the shaft.
Use the keys on the shaft to slide the sprocket to the desired position on the post. Make sure that the head of the cap screw is accessible.
Align the sprocket. Tighten the screws alternately and gradually until they are tightened (see the table below). Do not use an extension on the wrench handle. Do not allow the sprocket to contact the bushing flange. There should be a gap between the bushing flange and the sprocket.
The QD sprocket has a quick removal bushing and a flange that connects the bushing to the sprocket. It is also designed with a four-degree taper and cap screws for installation. The bushing also has hardened teeth to withstand wear.
size
There are QD sprockets of various sizes. These single-strand steel sprockets can be ordered in 2 styles: with and without hardened teeth. The diameter of the sprocket determines how many teeth it can hold.
matters needing attention
It is essential to understand the correct procedure before installing the QD sprocket. To ensure a successful installation, you need to follow these steps. First, you need to check the sprocket hub for any contamination. Next, you need to install the QD bushing in the correct position, which should be done with a torque wrench. Then gradually tighten the bolts evenly. Be careful not to overtighten the bolts. Otherwise, the bushing will be damaged prematurely. Also, ensure clearance between the QD bushing flange and the chain hub. This clearance prevents excessive stress on the chain hub.
The QD bushing is designed to insert into the tapered hole of the sprocket. The bushing is flanged to the sprocket, and the flange is held in place with cap screws. Another precaution when using QD sprockets is to avoid applying anti-seize lubricant to the cones. This may damage the sprocket and invalidate any manufacturer’s warranty.
QUICK REMOVAL BUSHING
The number of teeth and chain size of the QD sprocket of the CZPT inlet line are as follows. The most popular lengths are 40, 50, 60, and 120. These sprockets can be easily removed.
The QD sprocket has a tapered flange that connects the bushing to the sprocket. The flange is secured to the sprocket with cap screws. This facilitates removal and installation.
The following steps are required to install the QD bushing. First, ensure that the bushing flange is clean and dry. Then, align the sprocket with the bushing. If there is a gap between the flange and the chain hub, lock washers can be used to ensure proper sealing.
Hardened teeth
The hardened teeth on the QD sprocket are designed to be more durable. They have a black oxide surface to prevent rusting and are precision machined for maximum transmission efficiency. In addition to being tough, they can also withstand bad weather.
In addition to hardened teeth, Martin’s saber tooth sprocket has also been set to extend the life of the chain. This type of sprocket is recommended for 4 to 1 and smaller ratios. It is also recommended for sprockets with less than 24 teeth.
Smart tooth technology is another feature that makes these sprockets unique. It includes a wear indicator pin on the thrust face of the teeth. The wear indicator pin will be exposed when the profile begins to reverse.

Business type

Manufacturer & Exporter

 

Main export market

Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa

 

Material

Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass

 

Manufacturing method

Forged and then machined, hobbed, if need can also weld

 

 

Heat treatment

Hardening and Tempering, High Frequency Quenching, Carburizing Quenching

 

 

Surface treatment

Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on

 

 

Model

ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240

DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A

DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B

 Process

Forging, Hobbing, Precision machining

 

 

Teeth

9T-100T

 

 

Type

Type A sprockets :Plate (without Hub)

Type B sprockets:One side with hub

Type C sprockets: Double side with hub

Finished bore sprockets:With the inner hole ,keyway and screw

Sprocket quality testing

In each work process and after the final manufacture of the product, all items will be thoroughly inspected and tested to ensure the best product quality on the market.

Multiple processing methods
other sprockets
We also provide various chains

US $50-100
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Installation Guide 3-Year Warranty
Warranty: Installation Guide 3-Year Warranty
Usage: Popular Type, Tailored Version
Loading Weight: 80T
Certification: ISO/TS16949, CCC, DOT, ISO, CE
Structure: Dump Trailer

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type
Manufacturer & Exporter
 
Main export market
Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
 
Material
Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass
 
Manufacturing method
Forged and then machined, hobbed, if need can also weld
 
 
Heat treatment
Hardening and Tempering, High Frequency Quenching, Carburizing Quenching
 
 
Surface treatment
Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
 
 
Model
ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B
 Process
Forging, Hobbing, Precision machining
 
 
Teeth
9T-100T
 
 
Type
Type A sprockets :Plate (without Hub)
Type B sprockets:One side with hub
Type C sprockets: Double side with hub
Finished bore sprockets:With the inner hole ,keyway and screw
US $50-100
/ Piece
|
100 Pieces

(Min. Order)

###

After-sales Service: Installation Guide 3-Year Warranty
Warranty: Installation Guide 3-Year Warranty
Usage: Popular Type, Tailored Version
Loading Weight: 80T
Certification: ISO/TS16949, CCC, DOT, ISO, CE
Structure: Dump Trailer

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

###

Business type
Manufacturer & Exporter
 
Main export market
Europe, North and South America, Southeast Asia, Oceania, Middle East, Africa
 
Material
Alloy Steel, Carbon Steel, Stainless Steel,Aluminum, Copper, Brass
 
Manufacturing method
Forged and then machined, hobbed, if need can also weld
 
 
Heat treatment
Hardening and Tempering, High Frequency Quenching, Carburizing Quenching
 
 
Surface treatment
Oxide black, Galvanized, Nickel plated, Chrome plated, Sandblasting, Painted and so on
 
 
Model
ANSI: 25/35/41/40/50/60/80/100/120/140/160/180/200/240
DIN/ISO:04C/06C/085/08A/10A/12A/16A/20A/24A/28A/32A/36A/40A/48A
DIN/ISO:04B/05B/06B/08B/10B/12B/16B/20B/24B/28B/32B/36B/40B/48B
 Process
Forging, Hobbing, Precision machining
 
 
Teeth
9T-100T
 
 
Type
Type A sprockets :Plate (without Hub)
Type B sprockets:One side with hub
Type C sprockets: Double side with hub
Finished bore sprockets:With the inner hole ,keyway and screw

bronze bushing
China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel     bushing replacement		China Guaranteed Quality Finished Bore Qd Sprocket Chain & Sprocket in Steel and Stainless Steel     bushing replacement
editor by czh 2022-11-30